Quality Assurance, Testing and Compliance in Medical Device Development

April 10, 2015

Safety and reliability are two of the most important aspects when it comes to medical devices – quite naturally, since human lives may be dependent on them. As a consequence, ensuring the high quality of products used in the medical field is a top concern. Strict regulations and international standards specify the general requirements related to not only the medical end products themselves, but also the processes used in their development.

In the case of simple hardware or instruments such as needles or scalpels, quality assurance (QA) and compliance with relevant standards may seem manageable. However, complex modern medical devices are increasingly relying on embedded software, furthering the importance, as well as the level of difficulty involved in their QA & testing. Compliance with the adequate regulations (IEC 62304, ISO 14971 or US FDA CFR Title 21 Part 11 are some of the relevant standards for medical device software developers) is of paramount importance in the development of these medical devices.

Compliance with medical standards

To be more precise, as a medical device developer or manufacturer, ensuring that both your development processes and your end products fit the requirements set forth by these industry standards is a bare necessity. Not only could it save you a great deal of costs and trouble (lawsuits, product recalls, damaging your reputation etc.) – and more importantly, of course, the lives of many patients – it is also mandatory in more and more cases.

The growing number of medical device recalls in recent years is most likely a direct consequence of the increasing complexity of software-driven devices. FDA research has reported that software design failures have been responsible for a large portion of these recalls, accounting for about 15% of all device recalls between 2010 and 2012. The more your devices are reliant on software, the more you have to step up your QA efforts to avoid grave consequences.

 

medical_device_recall Quality Assurance, Testing and Compliance in Medical Device Development medical

So how does one ensure compliance while managing the already complex processes involved in development?

IEC 62304

As an internationally harmonized regulation used both in the EU and the US, this standard aims to ensure the safety and quality of your end product (which, in this case, is a piece of software – whether it\’s a standalone piece of medical software, or software embedded in a medical device). The standard covers everything from planning through design and risk management all the way to testing, release and maintenance.

In addition to its advanced features and functionality to support compliance with IEC 62304, codeBeamer ALM offers a dedicated IEC 62304 Medical Template with a preconfigured workflow (with standard-compliant e-signatures), trackers, a medical wiki with valuable domain knowledge, release- and document management. These ensure full traceability and auditability throughout the development lifecycle.

To find out more about IEC 62304 compliance with codeBeamer, please feel free to download our medical brochure to the right, and for a practical demonstration, watch our webinar recording at the bottom of this article.

ISO 14971

ISO 14971 is a standard that governs risk management in medical device software development. The standard covers risk analysis, the documentation and reporting of the risk management lifecycle, as well as residual risk analysis and monitoring of the device in operation. Specifically, it regulates the assignment of risk management responsibilities, risk and residual risk analysis, the creation of risk management files, documenting the intended use of the system being developed, and post production monitoring & reporting.

Through its advanced (and fully configurable) risk management features, codeBeamer greatly facilitates compliance with ISO 14971. For a practical explanation and demonstration of how risk management with codeBeamer works in practice, watch the video below.

facebook Quality Assurance, Testing and Compliance in Medical Device Development medical twitter Quality Assurance, Testing and Compliance in Medical Device Development medical google Quality Assurance, Testing and Compliance in Medical Device Development medical linkedin Quality Assurance, Testing and Compliance in Medical Device Development medical

Related E-Book

Intland's Medical IEC 62304 Template

First Name

Last Name

Email Address

Company

Phone Number

Industry

Kristof Horvath

Written by

Kristof holds a BA in Commerce and Marketing and is especially passionate about inbound and content marketing. On the Intland blog, he is covering topics related to application lifecycle management and agile methods.

Kristof Horvath has written 103 posts for Intland Software.

No comments

Leave a Reply

Your email address will not be published. Required fields are marked *